Differences

This shows you the differences between two versions of the page.

--- en:cold_chain:settings [2021/02/15 23:11] – rowena
+++ en:cold_chain:settings [2021/06/04 05:49] (current) – [Cumulative Exposure Configurations] Craig Drown
@@ Line 8: / Line 8: @@
 When using the mSupply ColdChain application for the first time, the Sensor Settings screen will have two sections:
   *Options
   *Found Sensors
+<WRAP center round important 60%> Please refer to the [[en:cold_chain:getting_started|mSupply ColdChain Getting Started]] for information about the device settings and sensor requirements and recommendations when setting up the application for the first time. </WRAP>
 === Options ===
-**Logging interval:** Sets the default number of minutes between logs on sensors. Using the slider, you can set the default log interval to any length between 1 and 100 minutes. The logging interval applies for all sensors when they are first linked to the mSupply ColdChain application. Different log intervals can be set for each sensor in **''Available Sensors/Log interval.''**
+**Logging interval:** Sets the default number of minutes between logs on sensors. Using the slider, you can set the default log interval to any length between 1 and 100 minutes. The logging interval applies for all sensors when they are first linked to the mSupply ColdChain application. Different log intervals can be set for each sensor in **Available Sensors/Log interval** (see below).
 {{ :en:cold_chain:pasted:20210215-215500.png?300 }}
@@ Line 39: / Line 40: @@
-<WRAP center round important 50%> We recommend that each device should be linked to a maximum of six sensors. Each sensor should only be linked to one device. </WRAP>
 ==== Temperature breach settings ====
@@ Line 88: / Line 88: @@
 **Period:** The time period used for cumulative temperature configuration (and hence alerts) on the Sensor tab is set at 72 hours.
-To view cumulative temperature breaches for a different period, you can **''change the time period on the Sensor Detail screen''**. The mSupply ColdChain application will use this time period to calculate cumulative temperature and display any breaches at the top of the Sensor Detail screen.
+To view cumulative temperature breaches for a different period, you can [[en:cold_chain:sensors#sensor_detail|change the time period on the Sensor Detail screen]]. The mSupply ColdChain application will use this time period to calculate cumulative temperature and display any breaches at the top of the Sensor Detail screen.
-<WRAP center round info 50%> You can export the sensor logs for further information and investigation regarding temperature breaches. </WRAP>
+<wrap center round info 95%> You can export the sensor logs for further information and investigation regarding temperature breaches. </wrap>
 \\
 \\
 |  //  Previous:  **[[en:cold_chain:sensors]]** | | Return to homepage: **[[en:cold_chain:start]]** //  |